Eaton Tripp Lite Series DVI over Cat5/6 Active Extender Kit, Box-Style Transmitter/Receiver for Video, Up to 200 ft. (60 m), TAA

1 Input Device - 1 Output Device - 200 ft Range - 2 x Network (RJ-45) - 1 x DVI In - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - Wall Mountable - TAA Compliant

Product ID

Mfg. Part: B140-101X

UNSPSC: 52161600

MNJPartNumber: MNJ8153816

Availability

In Stock

Product Pricing

$362.60

Options & Accessories

Eaton Tripp Lite Series DVI Single Link Cable, Digital TMDS Monitor Cable (DVI-D M/M), 10 ft. (3.05 m)

(DVI-D M/M) 10-ft.

Mfg. Part: P561-010

$25.49

Eaton Tripp Lite Series DVI Single Link Cable, Digital TMDS Monitor Cable (DVI-D M/M), 6 ft. (1.83 m)

(DVI-D M/M) 6-ft.

Mfg. Part: P561-006

$19.42

Eaton Tripp Lite Series Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M), PoE, Blue, 50 ft. (15.24 m)

Category 6 - 50ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-050-BL

$49.86

Tripp Lite by Eaton Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M) PoE Blue 75 ft. (22.86 m)

Category 6 - 75ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-075-BL

$77.51

Tripp Lite by Eaton Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M) PoE Blue 100 ft. (30.5 m)

Category 6 - 100ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-100-BL

$109.36

Overview
Specification

Main Features

The B140-101X is a DVI Over Cat5 Active Extender Kit that comes with both transmitter and receiver units. It transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-101X is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Installation is simple. Connect a the built-in DVI connector on the transmitter unit to a DVI source. Connect the receiver unit to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the RJ45 ports on the transmitter and receiver units are connected using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft..

Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a chain) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..