Eaton Tripp Lite Series HDMI over Dual Cat5/Cat6 Extender Wall Plate Kit with Transmitter and Receiver, TAA

Wall Mount

Product ID

Mfg. Part: P167-000

UNSPSC: 31162307

MNJPartNumber: MNJ529699

Availability

800-870-4340 Contact your MNJ Sales Representative for the latest availability

Product Pricing

$88.20

Options & Accessories

Eaton Tripp Lite Series HDMI Signal Booster / Extender, 1920 x 1200 (1080p) 24Hz, Up to 150 ft. (45 m), (HDMI F/F),TAA

Mfg. Part: B122-000

$23.04

Eaton Tripp Lite Series Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M), PoE, Blue, 50 ft. (15.24 m)

Category 6 - 50ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-050-BL

$32.29

Eaton Tripp Lite Series Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M), PoE, Blue, 100 ft. (30.5 m)

Category 6 - 100ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-100-BL

$51.05

Eaton Tripp Lite Series Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M), PoE, Blue, 150 ft. (45.72 m)

Category 6 - 150ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-150-BL

$71.01

Eaton Tripp Lite Series Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M), PoE, Blue, 125 ft. (38.1 m)

Category 6 for Network Device - 125ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Blue

Mfg. Part: N202-125-BL

$52.69

Overview
Specification

Main Features

With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 ft. away from the HDMI source, using readily available Cat5 or Cat6 UTP cable (for best performance, use Solid wire Cat6). The kit consists of a Passive wallplate at the source side, and an Active wallplate (with built-in signal regenerator) at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the HDMI source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit.